Bathroom Extract Fans
Air Handling Units
In-line Duct Fans
Heat Recovery Units
Acoustic Cabinet Fans
Roof mounted fans
Comfort Cooling Range
Hand and Hair Dryers 
Air Purifiers
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
In-line Duct Fans
Acoustic Cabinet Fans
Roof mounted fans
Atex Fans for Explosive Hazardous 
Wall or Window Extract Fans
Whole house Extract Units
Kitchen Extract Fans 
Kitchen Extract Hoods 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
-
Industrial kitchens
-
Continuous
Casing with aluminium profile structure, double-skin panels in galvanised steel sheet and acoustic insulation with 17 mm non-flammable glass wool (M0).
Sealed base of the casing forming a tray for collecting condensate and cleaning water, with copper drain.
Backward-curved centrifugal impeller, made of aluminium and dynamically balanced.
Direct current motor, located outside the airflow, with remote terminal box and integrated on/off switch.
Motors
EC direct current motor, with very high efficiency and low power consumption:
KABB models: Single-phase supply 230V ± 10% 50/60Hz, IP55, class F, with thermal protection. Speed adjustable either by the potentiometer integrated in the terminal box or by an external control such as REB-ECOWATT. Analogue input in the terminal box to control the fan with a 0-10V signal. Ambient temperatures from -20ºC to +50ºC.
KABT models: Three-phase supply 400V ± 10% 50/60Hz, IP55, class F, with thermal protection. Speed adjustable either by the potentiometer integrated in the terminal box or by an external control such as REB-ECOWATT. Analogue input in the terminal box to control the fan with a 0-10V signal. Ambient temperatures from -20ºC to +40°C.
Sealed base of the casing forming a tray for collecting condensate and cleaning water, with copper drain.
Backward-curved centrifugal impeller, made of aluminium and dynamically balanced.
Direct current motor, located outside the airflow, with remote terminal box and integrated on/off switch.
Motors
EC direct current motor, with very high efficiency and low power consumption:
KABB models: Single-phase supply 230V ± 10% 50/60Hz, IP55, class F, with thermal protection. Speed adjustable either by the potentiometer integrated in the terminal box or by an external control such as REB-ECOWATT. Analogue input in the terminal box to control the fan with a 0-10V signal. Ambient temperatures from -20ºC to +50ºC.
KABT models: Three-phase supply 400V ± 10% 50/60Hz, IP55, class F, with thermal protection. Speed adjustable either by the potentiometer integrated in the terminal box or by an external control such as REB-ECOWATT. Analogue input in the terminal box to control the fan with a 0-10V signal. Ambient temperatures from -20ºC to +40°C.
-
Backward blade impeller
Prevents dirt from accumulating on them.
Dynamically balanced. -
Robustness
Quality finishes, with plastic edging and aluminium profiling that provides great strength. -
IP55 watertight terminal box with built-in on/off switch
Facilitates installation and maintenance.
