LOW CONSUMPTION ACOUSTIC CABINET FANS WITH INTEGRATED FILTER
UVF ECOWATT

Cabinet fans with integrated, low-pressure drop filters, manufactured from galvanised sheet steel and internally insulated with 30mm thick mineral wool (M0), airtight intake and discharge joints, easy access to filters via rotary traction type closures. Equipped with backward curved centrifugal impellers.
Brushless, high performance and low consumption EC motor, 230V ± 10% 50/60Hz power supply, IP44, ball bearings, thermal protection, ON/OFF switch with built-in potentiometer to adjust speed and analogue input 0-10V signal to control the fan.
All models have the capacity to mount up to 3 filters.

Filters
− F7 Version: Supplied with F7 filter.
It is possible to add a second high-efficiency filter and a pre-filter, both accessories.
−−Version with F7 filter + F9 filter.
It is possible to add a pre-filter (accessory).
High-efficiency filter assembly system with clamping arms which allows adaptation to one or two filters. Thanks to the threaded knobs, it is possible to tighten the union between the filter and frame well, minimising external air by-pass compared with the usual guide-mounted filters.
It is recommended to add a pre-filter (G4 or M5 supplied as accessory) to extend the useful service life of the high-efficiency filters.
Filtration efficiency according to ISO-16890 of F7+F9 version ePM10 = 99.5%, ePM2.5 = 98.5%, ePM1 = 96.2%.

Other data
They can be placed in any position.
Designed for indoor installations.
Operating temperature from -20 ºC to +40 ºC.
High-efficiency filters and very low pressure loss.