Air Treatment

Air Treatment

Range of Air Treatment

  • At S&P we offer configurable air treatment units suitable for commercial or industrial application. Our units allow different battery, filters and other accessories configuration, so you can select the best ventilation solution for every installation.

    Discover all the possibilities our air treatment units offer and configure your air treatment unit to find the solution that better suits your installation.


  • UTBS PRO-REG, low profile for false ceiling installation

    Air treatment unit range UTBS PRO-REG is specifically designed for installation in false ceiling due to their low profile. The framework of these units have extruded aluminium profiles and reinforced nylon corner joints. They have good thermal and acoustic performance thanks to their double skin sandwich panels with 25 mm mineral wool insulation, with plastic coated outer panel and galvanised steel inner panel.

    UTBS PRO-REG includes integral operating control, which can be manual or automatic to adapt to the different VAV, CAV or COP modes. VAV is variable air volume where fan speed can be adjusted via analogue 0-10V signal. CAV is constant air volume where fan speed can be adjusted to allow a constant airflow. COP is constant pressure where fan speed can be adjusted to maintain a constant pressure in the ducting system.

    They offer different combinations of water and direct expansion coils and electric batteries so you can choose the solution that suits better every installation.

    CAIB/T PRO-REG, the best solutions for commercial offices and industrials kitchens

    Our CAIB/T PRO-REG air treatment units, are specially design to introduce fresh air to commercial offices and industrial kitchens. These units are made from galvanised sheet steel with reinforced insulation by double skin panels of 50 mm (rockwood insulated), 40 kg/m3 density and A1 fire rate in accordance with EN 13 501-1 standard.

    5 versions are available: with electric heater, with hot water coil, with reversible water coil, with both hot water coil and cold water coil or with cold water coil. These units have direct drive plug fans with EC motor, in-line duct connection by circular flanges with integrated rubber seals and G4 grade filter integrated inside the cabinet on slides (On request, F5 or F7 grade filters).

    The reversible mounting of these air treatment units allow the access through the inferior of the cabinet, both for the upper and the lower side. In addition, they have safety protection on the access cover when the fan is fixed into the ceiling.

    UTBS, multiple configurations for every need

    Air treatment units from UTBSseries are characterised by their low profile making them suitable for installation in false ceilings. The framework is made of extruded aluminium profiles and reinforced nylon corner joints, with plastic coated outer panel and galvanised steel inner panel. They have good thermal and acoustic performance thanks to their double skin sandwich panels with 25 mm mineral wool insulation. In order to optimize the working point of the air treatment units UTBS, their motors are equipped with thermal protection.

    They offer the possibility to maximize the performance of these air treatment units installing chilled water coils, high efficiency filter boxes. There are other components that can be added to these units such as heat-exchanger, by-pass for free-cooling, sound attenuators, plenums…