Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
-
Approved to EN12101-3 standard Certificate number 0370-CPD-0406
-
CONTINUOUS
-
Car Parks
Range of single inlet direct drive centrifugal fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked) and suitable for the continuous extraction of air stream up to 300ºC.
All casings are manufactured from electro-welded sheet steel protected against corrosion by grey epoxy-polyester paint coating.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 4 or 6 poles.
Motors
All motors are IP55, class F.
Electrical supply:
-Three phase 230/400V-50Hz up to 3kW.
-Three phase 400V-50Hz, for higher power motors.
(See characteristics chart).
Additional Information
The scroll can be orientated in 8 different positions as per the table below.
Standard supplied position: LG 270.
On request
Fan supplied in RD position.
Fan fitted with 2-speed motor.
All casings are manufactured from electro-welded sheet steel protected against corrosion by grey epoxy-polyester paint coating.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 4 or 6 poles.
Motors
All motors are IP55, class F.
Electrical supply:
-Three phase 230/400V-50Hz up to 3kW.
-Three phase 400V-50Hz, for higher power motors.
(See characteristics chart).
Additional Information
The scroll can be orientated in 8 different positions as per the table below.
Standard supplied position: LG 270.
On request
Fan supplied in RD position.
Fan fitted with 2-speed motor.
-
Standard motor with cooling wheel
Motor heat removal system ensures extraction of high temperature air stream. -
Impellers dynamically balanced
Forward curved centrifugal impellers dynamically balanced according to ISO 1940 standard, providing vibration free Operation.
