Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
Use
For room ventilation, to remove heat, smoke and stale air, it must be remembered that in order to have proper fan operation, it is necessary to replace the extracted air by introducing the same volume of air into the room.
Working temperature
- 20°C + 40°C.
Construction
Direct-drive. The fan casing consists of a ring in steel Fe 360 B, which is flanged according to DIN 24154. The impeller with air-foil blades is made of polypropylene and is locked on a die-cast duraluminium hub and axis mounted wheel. Plate parts are immersed in an electrophoretic bath and then baked at 180°C.
Motor
Three-phase motor, 230/400 V, 50 Hz, forma B5 execution. Other characteristics on demand.
Direction of the air
From motor to impeller.
For room ventilation, to remove heat, smoke and stale air, it must be remembered that in order to have proper fan operation, it is necessary to replace the extracted air by introducing the same volume of air into the room.
Working temperature
- 20°C + 40°C.
Construction
Direct-drive. The fan casing consists of a ring in steel Fe 360 B, which is flanged according to DIN 24154. The impeller with air-foil blades is made of polypropylene and is locked on a die-cast duraluminium hub and axis mounted wheel. Plate parts are immersed in an electrophoretic bath and then baked at 180°C.
Motor
Three-phase motor, 230/400 V, 50 Hz, forma B5 execution. Other characteristics on demand.
Direction of the air
From motor to impeller.
