Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
Direct-coupled centrifugal fan with single suction. Manufactured from carbon steel protected against corrosion by cathodic electrocoating + polyurethane paint RAL 7045.
Air temperatures to be handled: -20ºC/+100ºC continuous.
Versions
• Version 4: Impeller mounted on the motor shaft type B3 supported by the foot or bracket. Version with cooling impeller up to +220ºC.
• Version 5: Impeller mounted on the motor shaft type B5 with flange fixed directly to the side of the volute. Version with cooling impeller up to +220ºC.
• Version 8: Coupling via elastic joint connecting the motor to the fan shaft. Version with cooling impeller up to +300ºC.
Motors
2-pole, high efficiency IE3*, three-phase supply voltage 230/400V 50Hz motor size 112 and 400/690V 50Hz for larger motors. Protection IP55, Class F.
*For power ratings between 75 kW and 200 kW, the motor will be IE4.
On request
• Manufacture in different construction materials.
• 60 Hz versions.
• External paint in various RAL colours.
• Hot-dip galvanising of the fan’s static parts.
• Construction for corrosive environments.
• Versions with wear-resistant materials.
• Motors for special applications.
• Motors suitable for control with frequency inverter.
• Available accessories: flexible connections, inspection door, drain purge, dampers, protective grids, filters, silencers, flow regulator, valves and dampers.
• Sealed fans.
• Thermal insulation.
Air temperatures to be handled: -20ºC/+100ºC continuous.
Versions
• Version 4: Impeller mounted on the motor shaft type B3 supported by the foot or bracket. Version with cooling impeller up to +220ºC.
• Version 5: Impeller mounted on the motor shaft type B5 with flange fixed directly to the side of the volute. Version with cooling impeller up to +220ºC.
• Version 8: Coupling via elastic joint connecting the motor to the fan shaft. Version with cooling impeller up to +300ºC.
Motors
2-pole, high efficiency IE3*, three-phase supply voltage 230/400V 50Hz motor size 112 and 400/690V 50Hz for larger motors. Protection IP55, Class F.
*For power ratings between 75 kW and 200 kW, the motor will be IE4.
On request
• Manufacture in different construction materials.
• 60 Hz versions.
• External paint in various RAL colours.
• Hot-dip galvanising of the fan’s static parts.
• Construction for corrosive environments.
• Versions with wear-resistant materials.
• Motors for special applications.
• Motors suitable for control with frequency inverter.
• Available accessories: flexible connections, inspection door, drain purge, dampers, protective grids, filters, silencers, flow regulator, valves and dampers.
• Sealed fans.
• Thermal insulation.
ATEX versions
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.
• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII
2G IIB+H2 T2-T3-T4, Motor ExdIIc
3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)
3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)
• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C
3D IIIB T125°C-T135°C-T195°C-T295°C
• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C
3D IIIC T125°C-T135°C-T195°C-T295°C
On request, explosion proof versions in accordance with ATEX directive for three phase models:
Ambient temperature -20°C to +60°C, ambient pressure (abs.) 0,8 bar to 1,1 bar according to EN 14986.
• Gas:
2G IIB T2-T3-T4, Motor Exd IIB or ExeII2G IIB+H2 T2-T3-T4, Motor ExdIIc3G IIB T2-T3-T4, Motor ExnA (only for 3G zone)3G IIB+H2 T2-T3-T4, Motor ExnA (only for 3G zone)• Non-conductive dust
2D IIIB T125°C-T135°C-T195°C-T295°C3D IIIB T125°C-T135°C-T195°C-T295°C• Conductive dust (compulsory IP 65 motor):
2D IIIC T125°C-T135°C-T195°C-T295°C3D IIIC T125°C-T135°C-T195°C-T295°C -
Forward curved impeller
