Range of in-line fans for circular ducts, designed for high aerodynamic performances with a very compact profiles and very low sound levels.
Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting bracket do not increase the product’s profile. Optimised design of the impeller, guide vane and outlet diffuser, manufactured from injection-moulded plastic, to increase performance and lower the sound level.
Airtight joint between the galvanised steel casing and the plastic guide vane to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent-block between the motor and the holder to reduce the motor’s vibrations and lower the sound level of the installation, even in terms of speed regulation. IP65 terminal box allowing outdoor installation.
Motor
Fitted with an external rotor brushless EC motor:
- 230V ± 10% 50/60Hz, IP44.
- 100% speed controllable via internal potentiometer located in the terminal box or via 0-10V external signal.
- Ball bearings and thermal protection with manual reset.
- Working temperature: -20/40 ºC
Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting bracket do not increase the product’s profile. Optimised design of the impeller, guide vane and outlet diffuser, manufactured from injection-moulded plastic, to increase performance and lower the sound level.
Airtight joint between the galvanised steel casing and the plastic guide vane to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent-block between the motor and the holder to reduce the motor’s vibrations and lower the sound level of the installation, even in terms of speed regulation. IP65 terminal box allowing outdoor installation.
Motor
Fitted with an external rotor brushless EC motor:
- 230V ± 10% 50/60Hz, IP44.
- 100% speed controllable via internal potentiometer located in the terminal box or via 0-10V external signal.
- Ball bearings and thermal protection with manual reset.
- Working temperature: -20/40 ºC
-
Terminal box
Built-in, IP65 terminal box that does not add to the overall height dimensions. -
Airtight joints
Rubber gaskets for a more airtight joint with the installation’s ducts. -
High performance Impeller
New impeller geometry for reduced sound levels and to offer high performance. -
Mounting bracket
Strong mounting bracket supplied with the fan. -
Two mounting positions for support
The product can be mounted in two different positions by changing the position of the support’s anchoring. -
Two mounting positions for support
The product can be mounted in two different positions by changing the position of the support’s anchoring.