Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
Designed to be installed on the fans discharge side.The minimum air speed through the heater must be 1,5 m/s.
Maximum air temperature through the heater: 40ºC.
The heaters are fitted with:
-Tubular structure made of galvanized steel with joints at the entrance and outlet.
- Stainless steel AISI-304 / AISI-321 armoured heating element.
- Electrical heater regulation, incorporated.
- Armoured heating element.
- Double protection circuit to connect to the heater control circuit by means of a safety overheat automatic thermostat connected in series with another safety overheat manual reset thermostat (RESET).
- Wiring box IP43.
For the correct operation of the electric coils it is necessary to use different accessories and installation elements (temperature probe, protection pressure switch, contactors, etc) which are specified in the corresponding instructions, depending on the installation to be carried out.
Maximum air temperature through the heater: 40ºC.
The heaters are fitted with:
-Tubular structure made of galvanized steel with joints at the entrance and outlet.
- Stainless steel AISI-304 / AISI-321 armoured heating element.
- Electrical heater regulation, incorporated.
- Armoured heating element.
- Double protection circuit to connect to the heater control circuit by means of a safety overheat automatic thermostat connected in series with another safety overheat manual reset thermostat (RESET).
- Wiring box IP43.
For the correct operation of the electric coils it is necessary to use different accessories and installation elements (temperature probe, protection pressure switch, contactors, etc) which are specified in the corresponding instructions, depending on the installation to be carried out.
