Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
Unidirectional tubular axial fans, Jet Fans, designed to move large volumes of air in all types of large spaces.
Air performance (free discharge flow rate and thrust) and acoustic data obtained according to ISO 13350.
Description
Diameters from 450 to 630 mm.
Dynamically balanced impeller according to ISO 14694: G6.3, with aerofoil-type blades and semi-hub made of aluminum alloy according to EN 1706.
Casing and 2 support feet made of steel, according to EN 10130, hot-dip galvanized according to EN 1461.
External junction box (standard) or disconnect switch (optional).
Two circular silencers made of galvanized steel sheet.
Protective grille on intake and discharge.
For transport, the 450 diameter model will be delivered assembled. For diameters from 500 to 630, the fan can be delivered in 3 parts.
Motors
Three-phase power supply 400V/50Hz, IP55.
Two speeds 2/4 poles Dahlander connection type. Or single speed 2 poles.
Operating ambient temperature: -20ºC to +40ºC.
On request
Single speed motor, 2, 4 or 6 poles.
Inlet guard and outlet deflector (accessory).
Instead of the junction box, a safety start-stop switch IP65, factory installed or as an accessory.
Exterior paints in RAL colors.
Air performance (free discharge flow rate and thrust) and acoustic data obtained according to ISO 13350.
Description
Diameters from 450 to 630 mm.
Dynamically balanced impeller according to ISO 14694: G6.3, with aerofoil-type blades and semi-hub made of aluminum alloy according to EN 1706.
Casing and 2 support feet made of steel, according to EN 10130, hot-dip galvanized according to EN 1461.
External junction box (standard) or disconnect switch (optional).
Two circular silencers made of galvanized steel sheet.
Protective grille on intake and discharge.
For transport, the 450 diameter model will be delivered assembled. For diameters from 500 to 630, the fan can be delivered in 3 parts.
Motors
Three-phase power supply 400V/50Hz, IP55.
Two speeds 2/4 poles Dahlander connection type. Or single speed 2 poles.
Operating ambient temperature: -20ºC to +40ºC.
On request
Single speed motor, 2, 4 or 6 poles.
Inlet guard and outlet deflector (accessory).
Instead of the junction box, a safety start-stop switch IP65, factory installed or as an accessory.
Exterior paints in RAL colors.
